System Start-Up
Prepare & Balance the Water
To achieve optimal performance, the pool must be as clean as possible to start with.
Backwash or clean filters one day before starting the DEL AOP S. Run pool filtration continuously for 24 hours prior to starting ozone system.
Superchlorinate pool water using a chlorine based shock treatment.
Test pool chemistry and adjust pH between 7.4 and 7.6. Adjust total alkalinity between 80 and 120 ppm.
System Start up
With the DEL AOP S cover off, turn on pool pump.
Check to ensure the DEL AOP S system active indicator & the ozone module indicators are on.
Verify that ozone is being pulled into the injector by checking for bubbles at the return. If an MDV is installed, check the MDV for bubbles.
Repeat the above steps for all system conditions (multi-speed pump settings, etc.)
Congratulations!
You have completed this chapter. To go to the next chapter, click next. To go back to the Chapter Table of Contents, click done.