The pull-cable broke or became unattached from the LED strip. How do I replace it?
If the cable breaks or is pulled through while untied, try the following:
- A shop vac can be used to guide it back through the channel.
- Push the new pull-cable into the side channel making sure to keep it along the inside wall (the door opening tool can be used to help guide the pull-cable into the channel).
- Place a shop vac hose over the opposite side channel opening and turn on the shop vac. The shop vac will “suck” the pull-cable through the waterfall. Re-attach to the LED strip.
If the pull-cable actually tears through the end of the LED strip, try the following:
- The cable can be reattached by tying around the back of the black over-molded end. The door unlatching tool can be used to help guide the LED strip into the channel if it gets stuck.