No Power
No Power to Control Unit
If you turn the system on, but there is no power, check the following common issues for possible solutions.
Voltage
System Breaker
Tripped Breaker
Check the breaker and make sure it hasn’t been tripped. If so, switch it back on.
If the unit power came back on, it is likely this solution worked.
Did this solve the problem?
No, please show other solutions
Low Voltage
It is possible that you may not be getting enough voltage. Check the incoming voltage. Standard voltage is 120/220V Universal. (Ships ready for 220V)
If the unit power came back on, it is likely this solution worked.
Did this solve the problem?
No, please show other solutions
System Breaker
- Turn the unit off using the switch on the face of the control
- Press the clear button on the bottom of the control unit to reset.
- Turn the unit back on using the switch on the face of the control.
System Breaker
If the unit power came back on, it is likely this solution worked.
Did this solve the problem?
No, please show other solutions
Congratulations!
You have completed this chapter. To go to the next chapter, click next. To go back to the Chapter Table of Contents, click done.