Operation
Important Warnings
Always use extreme caution when operating the PowerClean Max feeder.
NEVER OPEN WHEN THE PUMP IS RUNNING.
NEVER INHALE CHEMICAL FUMES.
Use caution in hotter weather, as this can create a higher level of gasses.
Wear protective glasses and gloves when operating the feeder.
NEVER introduce chemicals via your pool’s skimmer.
Before you Begin
Before starting the feeder properly balance pool water to 1.0 – 1.5 ppm Chlorine or 2.0 – 2.0 ppm Bromine.
Sanitizer demand can depend on many environmental factors.
Valve settings may need adjustment at times to accommodate changing conditions.
Attempt to increase the feeder rate a day or two in advance of anticipated increases in demand.
Operation
It is recommended to start-up on setting #1. (Higher numbers dispense more sanitizer.)
Small, incremental changes are recommended to best control sanitizer levels.
Check the levels daily for the first week after start-up to adjust to the ideal rate.
Use testing kits to determine proper Chlorine or Bromine residual levels.
Congratulations!
You have completed this chapter. To go to the next chapter, click next. To go back to the Chapter Table of Contents, click done.