LOW OR NO CHLORINE RESIDUAL IN POOL

Low stabilizer (Cyanuric acid level in pool water)

Add stabilizer to maintain 20-30 PPM per pool professional’s recommendation

 

Insufficient run time

Increase daily run time. Recommend 1 hour of run time per 10 degrees ambient temp.

 

Chlorine Output percentage set too low

Increase the Sanitizer Output Level

 

Recent increases in weather temperature without increasing the Sanitizer Output of the system

Increase the Sanitizer Output Level

 

Temporary loss of chlorine due to heavy rain, leaves, fertilizer or heavy bather load, recent party or pets using the pool

Set Sanitizer Output to BOOST (Super Chlorinate) for 72 hours. Recheck- if still too low, super chlorinate with outside source. (Take pool water sample to pool professional.)

 

Loss of salt due to rain or added water

Test salt level. Add salt using the chart provided in installation manual.

 

Low salt level (less than 3,000 PPM). System Power light is flashing/ service light is yellow/ solid.

Increase Salt level