Pre-Installation Information

IMPORTANT WARNINGS

Not for use with portable pools.

To avoid personal injury when working with pool chemicals, always wear rubber gloves and eye protection, and work in a well-ventilated area.

Use caution when choosing a location to open and use chemicals as they may damage any surface to which they come in contact. The addition of certain chemicals can reduce the effectiveness of chlorine.

This product produces chlorine. Individuals with any type of chlorine sensitivity should take the appropriate precautions to avoid injury or illness.

High water temperatures above 104 degrees (40 degrees C) or direct sunlight can cause the cell housing exterior plastic & control center cover to discolor.

System Sizing

Correct sizing of a chlorine generator is subject to the specifications of each body of water, and should be carefully evaluated for best results.

Where heightened chlorine demand exists due to warmer climates, humidity, high bather load, water features and other environmental factors, the maximum pool size should be reduced by at least 30%.

Specifications

All Powerclean Salt systems are shipped from the factory wired for 220 Volts.

Required Items

The following additional items are required for installation and are not included with Powerclean Salt:

Screwdriver

Level

Hacksaw or PVC Cutter

Wire Stripping Tool

Electric Drill

8AWG Copper Bonding Wire

Mounting Screws