Are you ready to make the switch to a better chlorine generator?

Summer is better with salt, so we made “salt” even better. Powerclean Salt chlorine generators from CMP are the next generation of salt systems for pools.

If you’ve been disappointed with other systems, you may want to make the switch to a friendly, backyard chlorine generator.

 

Check out our guide below for what to expect when you make the switch. 

 

IT'S SO EASY TO MAKE THE SWITCH

We have a free resource for you on how Powerclean Salt compares before you switch

WHAT YOU NEED TO KNOW WHEN SWITCHING TO POWERCLEAN SALT

EASY TO CLEAN AND MAINTAIN

No special stands, no acid required to clean

It’s normal for a salt cell to experience some mineral build-up on the plates. Other products require soaking in a diluted acid solution.

This is dangerous for customers, a liability for safety, and a hassle for service pros. How many have had a soaking cell fall over and damage a deck or cause a burn?

Ditch the acid and grab the blue cleaning tool

The titanium plates inside the Powerclean Salt cell are easy to remove. Simply unscrew the cap and you are done.

Use the blue cleaning tool to remove any debris or mineral build-up.

LARGE, WIDE PLATE SPACING

OTHER CELLS: TIGHTLY SPACED PLATES

Other cell plates are placed close together to allow the sharing of electricity between the plates. When the cell plates are crammed into a small space, they have to be cleaned more often as the calcium builds up between the plates causing permanent damage.

The super-wide spacing between Powerclean Salt cell plates means you have to clean less often…and cleaning is easier!

Better design: WIDER SPACING

In a better design, each plate is individually powered. The large titanium-coated plates are spaced further apart.

This design is easier to clean and minimizes calcium build-up.

SMART, TOUGH, DURABLE, DEPENDABLE

SMARTER CELL: NO FLOW SWITCH, NO TEMP SENSOR

One of the top failure points for most chlorine generator systems is at the sensors. These switches can serve a purpose but commonly break, fail or wear out.

When the switches stop working, the cell stops operating.

The Powerclean Salt cell uses an electrical current in the cell to check for proper conductivity. Simply connect the cell to pump power–or a synchronized timer–for a more fool-proof operation.

DEPENDABLE: WORKS IN A BROAD RANGE OF SALINITY LEVELS

Most salt cells have a narrow window of operation based on the level of salt in the pool. The Powerclean Salt cell will continue operating at a salinity level of 3,000 – 35,000 PPM.

We don’t recommend it, but we have even had customers successfully operate a unit with seawater!

SMART: WORKS IN A WIDE RANGE OF TEMPERATURES

Other systems have a temp sensor because they have to shut down at low temps to prevent cell damge.

Instead of measuring temperature, we measure conductivity. This allows our smart control system to adjust the actual power going to each cell plate to continue producing chlorine, even at low temperatures.

DURABLE - IT CAN TAKE THE HEAT

The heavy-duty heat sink in the control unit is excellent in hot environments. This system can be bulletproof if you live in states like Texas, Arizona and others with extreme outdoor temperatures.

DON'T LEAVE WITHOUT GETTING YOUR QUESTIONS ANSWERED!

Want more info on making the switch? Complete the form below.

CUSTOMER SERVICE
Request Info

Contact our award winning customer support team

FIND CMP PRODUCTS

Locate a CMP representative or pool products distributor near you

Resource Center

Find all CMP articles, videos, brochures and more

SUPPORT

How can we help - tech support, customer service